SRS Labs Projector 8953H - Manual (Page 62)

62
3.8.4 Registering My Connection
3.8 Profile data (continued)
One of the profile data, which is often used, can be registered as the My
Connection profile data. Once the data is registered, all you need to do is to select
the My Connection to connect to the network. (29)
1) Click [My Connection].
2) The “Add My Connection” screen will come
up.
The currently selected profile data for the My
Connection is shown with a check mark in
the list.
3) Select one of the profile data listed in the
window and put a mark in the check box.
The data selected before is turned
unmarked.
4) Click [OK], then the window is closed.
If you don’t want to select a new one, click
[Cancel].
• If you don’t want to use the My Connection, mark no data listed in the
window, and click [OK].
• In the list, all profile data are shown no matter which network adapter is
selected. You can register a profile data that is not for currently selected
network adapter as the My Connection profile data.
NOTE
3. Using the Live Mode