SRS Labs Projector 8953H - Manual (Page 57)

57
3.7.3 Switching the display mode
3.7 Start the “Live Viewer 3” (continued)
The “Live Viewer 3” has the Single PC mode and Multi PC mode. The modes can
be switched on the main menu.
1) Click the button on the main menu.
The buttons below are displayed.
2) Select from q to t buttons, and click it.
q
Switching to the Single PC mode : Your image is displayed on full screen.
w
-t Switching to the Multi PC mode : Your image is displayed on a quarter
screen identified in the button.
3) The projector screen is switched to the mode selected above, and the
transmission of your PC image will be started to display your image on the
screen.
4) The icon on the main menu is replaced by the icon you selected.
q w e r t
(Refer to  MIU menu in the User’s Manual (detailed) – Operating Guide for
the function on the projector.)
• The image transmission will be stopped, when you click the Single
mode button while the projector is in the Single PC mode or you click one of the
Multi mode buttons that shows the quarter screen which is currently displaying
your PC images in the Multi PC mode.
• If the Multi PC mode is selected, the projector screen is automatically divided
to 4 zones.
• If the Presenter mode is set on in the PC whose image is currently on screen
in the Single PC mode, the button cannot be clicked on other PCs.
• If the quarter screen that displays images sent from another PC is selected,
the network to the PC is disconnected.
NOTE
3. Using the Live Mode