SRS Labs Projector 8953H - Manual (Page 49)

49
3.5 Manual configuration (continued)
The message is appeared when the wireless
adapter you selected is already used for
another network connection.
n Are you sure you want to connect the selected projector?
3. Using the Live Mode
• To connect, click [Yes]. Proceed to the
3.6 Confirm the connection to your
destination. (50)
• Not to connect, click [No] then the “Live
Viewer 3” main menu is displayed even
though the network is not established.
Click on the main menu to go back
to the item 3.3.3 Connecting to the
network. (31)