SRS Labs Projector 8953H - Manual (Page 19)

19
2. Equipment connection and network setting
• If the default setting in the projector is used, set the data as above
into your PC. If an access point is used or any encryption mode is used, it is
required to set the data that is matched to your system.
Refer to the manuals for your PC or wireless LAN adapter or access point.
• If you want to use the existing network via an access point, contact your
network administrator before the connection.
NOTE
7) Set each item as follows.
Network name (SSID): wireless
Data encryption: not enabled (Default setting is not enabled.)
2.4 Manual network connection setting –Wireless LAN (continued)