SRS Labs Projector 8953H - Manual (Page 111)

111
5.4 Slide Show Mode (continued)
5. PC-LESS Presentation
You can play the Slide show at your desired configuration.
Configure the SLIDE SHOW items in THUMBNAIL.
1) START # : Set the beginning number of the Slide show.
2) STOP # : Set the end number of the Slide show.
3) INTERVAL : Set the interval time of the Slide show.
4) MODE : Select the Slide show mode.
ONE TIME : Play the Slide show one time.
ENDLESS : Play the Slide show endless.
5) PLAY : Play the Slide show.
It is not recommend to set the interval time
very short something like several seconds,
because it may take more than several
seconds to read and display an image file
if it is stored in very deep layer directory
or if so many files are stored in the same
directory.
• The settings of the Slide Show are saved to the “slidemode.txt”
file that is stored in the storage media. If the file is not existed, it is generated
automatically.
• The START #, STOP #, INTERVAL, and MODE are set by thumbnail menu
once, this setting has more priority than the Playlist.
• If the storage media is under the write protection or the “slidemode.txt” is
the read only type file, it is impossible to change the settings of the Slide Show.
• If you would like to release the priority, delete the “slidemode.txt” file from
directory.
NOTE