SRS Labs Projector 8953H - Manual (Page 59)

59
3.7 Start the “Live Viewer 3” (continued)
e
Presenter Mode
In the Single PC mode, the projector can be occupied by one PC and can
block an access from any other PC, if the Presenter mode is selected in the
“Live Viewer 3”.
While making your presentation, you don’t need to worry that the image on
screen is unexpectedly switched to an image sent by another PC.
If you want to turn it on, put a check mark in the check box.
• If the Multi PC mode is selected, the setting for the Presenter mode is
invalid.
• When switching from the Multi PC mode to the Single PC mode, the Presenter
mode setting of the PC is valid.
• The Presenter Mode is set valid in factory default setting.
NOTE
r
Display User Name
A "User Name" that is up to 20 letters can be input by using alphanumeric
characters.
The user name can be displayed on the projector screen, so you can find out
whose image is currently on the screen.
(Refer to  MIU menu in the User’s Manual (detailed) – Operating
Guide)
If the check box is not marked, the information is not sent to the projector.
3. Using the Live Mode