Tcps=n tcpt=n *enq=n, Aip=n – Sierra Wireless RAVEN 20070914 User Manual

Page 113

Advertising
background image

Raven 1x

108

20070914

n=0 ‐ 255

TCPS=n

TCP connection time‐out (TCPS) units. Specifies a time interval 
upon which if there is no in or outbound traffic through a TCP 
connection, the connection will be terminated.

n=0 : minutes

n=1 : seconds

TCPT=n

Interval to terminate a TCP connection when no in or 
outbound traffic. This value affects only the TCP connection in 
TCP PAD mode.

n=interval

Caution: TCPT should never be 0 when using the TCP mode. A
broken TCP session can result in the modem being left with a TCP
half-open connection that can only be terminated with a reset.

*ENQ=n

Outputs an ENQ [0x05] after the TCP CONNECT delayed by 
the Delay Connect Response time (S221). 

n=0 : Disabled (Default).

n=1 : Enable ENQ on CONNECT.

UDP

This group includes commands specific to UDP serial commu‐
nications.

Figure 1-6: AceManager : UDP

AIP=n

Allow IP address. 

Advertising