Sierra Wireless RAVEN 20070914 - Manual (Page 46)

Configuring your Raven
Rev 3.0B Feb.08 41
4. Write the changes to the modem
a. Click the Write button on the tool bar of AceManager.
b. Wait for the message “Write Successful” to appear in
the status bar.
Figure 5-5: AceManager : Write
Tip: Some configuration settings will require you to reset the modem
before they will take effect. You can reset the modem by using the
Reset button in AceManager or by using the reset button on the
modem. You can also reset the modem by cycling the power.
Using Templates
If you have a modem configuration that works well for your
needs, using AceManager, you can save that modem’s configu‐
ration as a template and then apply it to other Sierra Wireless
AirLink modems.
1. Creating the Template with
AceManager
a. Configure the “master” modem.
b. Click the Copy button on the tool bar to transfer all the
configured settings to the New Value column.
Figure 5-6: AceManager : Copy
c. Remove settings which are specific to your “master”
modem or verify settings are applicable to all your
modems.