Sierra Wireless RAVEN 20070914 - Manual (Page 123)

Raven 1x
118 20070914
*NETSMS2EMAIL=n
Specify the SMS/E‐mail server number. This maybe necessary
to send an SMS message to an email address. Cannot be used
with AceManager.
• n=SMS/E‐mail server number
*SMTPADDR=[d.d.d.d][name]
Specify the IP address or Fully Qualified Domain Name
(FQDN) of the SMTP server to use.
• d.d.d.d=IP Address
• name=domain name (maximum: 40 characters).
*SMTPFROM=email
Sets the email address from which the SMTP message is being
sent.
• email=email address (maximum: 30 characters).
*SMTPPW=pw
Sets the password to use when authenticating the email
account (*SMTPFROM) with the server (*SMTPADDR).
• pw= password
Note: Not required to use SMTP settings but may be required by your
cellular carrier.
*SMTPSEND=email[body]
Sends an email to the address specified, followed by the body
of the email message. The email message is terminated and
sent by entering a . or Ctrl‐Z on an empty line. Cannot be
configured with AceManager.
• email=email address
• body=message body
*SMTPSTATUS?
Returns the status of the last issued SMTP message
(*SMTPSEND). If no status is available 0 is returned. Once
read, the status is cleared out. The status codes returned come
from the SMTP server to which that the modem sent the
request. Unless the receiving server is not standard, they
follow the RFC for SMTP. Cannot be used with AceManager.
Example:
354 = send in progress
250 = sent ok