Sharp MX-7001 User Manual
Page 11
11
(9)
[LOGOUT] key (
)
Press this key to log out after you have logged in and
used the machine. When using the fax function, this key
can also be pressed to send tone signals on a pulse dial
line.
☞
(10) [#/P] key (
)
When using the copy function, press this key to use a job
program. When using the fax function, this key can be
used when dialing.
(11) [CLEAR ALL] key (
)
Press this key to return to the initial operation state.
Use this key when you wish to cancel all settings that
have been selected and start operation from the initial
state.
(12) [STOP] key (
)
Press this key to stop a copy job or scanning of an
original.
(13) [BLACK & WHITE START] key (
)
Press this key to copy or scan an original in black and
white. This key is also used to send a fax in fax mode.
(14) [COLOR START] key (
)
Press this key to copy or scan an original in color.
This key cannot be used for fax or Internet fax.
(15) [POWER SAVE] key (
) / indicator
Use this key to put the machine into auto power shut-off
mode to save energy.
The [POWER SAVE] key (
) blinks when the machine
is in auto power shut-off mode.
☞
(page 17)
(16) [POWER] key (
)
Use this key to turn the machine power on and off.
☞
(page 16)
(17) Main power indicator
This lights up when the machine's main power switch is
in the "on" position.
☞
(page 16)
LOGOUT
LINE
IMAGE SEND
DATA
DATA
READY
SYSTEM
SETTINGS
HOME
JOB STATUS
(11)
(13)
(12)
(14)
(9)
(10)
(15) (16) (17)