Sharp MX-7001 - Manual (Page 593)

39
MOVING A STORED FILE
Use this procedure to change the location of a file (move a file to a different folder).
After selecting the desired file, follow the steps below.
☞
SELECTING A FILE (page 29)
1
Touch the [Move] key.
2
Touch the [Move to:] key.
• A file cannot be moved to the Quick File Folder. With this procedure, the original name is changed and the file is
moved to the specified folder. (Unlike the "Save As" command on a computer, the file is not copied to the specified
folder with the original file remaining in the original location.)
• To change the file name, touch the [File Name] key.
3
The above screen shows the custom folders as an
example.
Select the destination folder.
(1) Touch the key of the folder to which you
want to move the file.
If a password is set for the selected folder, a password
entry screen will appear.
Enter the password with the numeric keys (5 to 8 digits)
and touch the [OK] key.
(2) Touch the [OK] key.
Job Settings Cancel
file-01 Name 1 8½x11 F. Color
Print Send
Property
Change
Move Delete Detail
Select the job.
Job Settings / Move Cancel
file-01 Name 1 F. Color
File Name
Move to:
Select the folder the file is moved to.
file-01
Move
8½x11
Main Folder
OK Job Settings / Move
1
2
All Folders ABCD EFGHI JKLMN OPQRST UVWXYZ
User 1
User 3
User 5
User 7
User 9
User 2
User 4
User 6
User 8
User 10
(1) (2)