Sharp MX-7001 - Manual (Page 48)

48
This chapter describes the peripheral devices that can be used with the machine and explains how to use the finisher,
saddle stitch finisher, and inserter, as well as Sharp OSA (application communication module and external account module).
PERIPHERAL DEVICES
Peripheral devices can be installed on the machine to increase its range of functionality.
The peripheral devices are generally optional, however, some models include certain peripheral devices as standard
equipment.
(As of June, 2007)
4
PERIPHERAL DEVICES
Product name Product number Description
Large capacity tray
MX-LCX2
Additional tray. A maximum of 3500 sheets of paper can be
loaded in the tray.
MX-LCX3
Additional tray. Supports wide sizes such as 12" x 18" (A3W). Up
to 3000 sheets can be loaded.
Finisher MX-FNX3
Output device that enables the use of the staple function and
offset function.
Saddle stitch finisher MX-FNX4
Output device that enables use of the staple function, offset
function and pamphlet copy function.
Paper pass unit MX-RBX2 This is required to install a finisher or saddle stitch finisher.
Punch module MX-PNX2B
Punches holes in copies and other output. Requires a finisher or
saddle stitch finisher.
Inserter MX-CFX1
Paper loaded in the inserter can be inserted into output as
covers and inserts. Manual stapling and hole punching is also
possible from the inserter.
Barcode font kit AR-PF1 Adds barcode fonts to the machine.
PS3 expansion kit MX-PKX1
Enables the machine to be used as a Postscript compatible
printer.
Internet fax expansion kit MX-FWX1 Adds an Internet fax function.
Facsimile expansion kit MX-FXX1 Adds a fax function.
Application integration module MX-AMX1
The application integration module can be combined with the
network scanner function to append a metadata file to a scanned
image file.
Application communication module MX-AMX2
This allows the machine to be linked over a network to an
external software application.
External account module MX-AMX3
This is required to use an external account application on the
machine.
When a finisher and inserter are installed on the machine, a punch module is also required.