Sharp MX-7001 - Manual (Page 677)

74
Scan Complete Sound Setting
The scan complete sound can be selected.
The Number of File Name/Subject/Body
Keys Displayed Setting
This setting is used to select the number of file name /
subject keys that are displayed in the screen. The
number of keys can be set to 6, 12, or 18.
The Number of Direct Address
Keys Displayed Setting
Select 5, 10, or 15 for the number of one-touch keys that
appear in the address book screen.
Disable Switching of Display Order
This is used to prohibit changes to the order of display
(search number order, ascending, descending) in the
address book.
When this setting enabled, touching a tab on the
address book screen does not change the order. The
display order will remain fixed at the order that is in effect
when this setting is enabled.
Hold Setting for Received Data Print
This function holds received faxes and Internet faxes in
memory without printing them. The faxes can be printed
by entering a password (factory default setting: 0000)
with the numeric keys.
Password
When [Hold Setting for Received Data Print] and
[Change Password] are enabled, the password (4-digit
number) can be changed.
Change Password
Enable this setting to allow the password to be changed.
This is used to prohibit the storing of destinations.
Storing from the machine, storing from the Web page,
and storing from a computer can each be separately
prohibited.
Disable Registering Destination
from Operation Panel
This disables address control from the machine.
Configure the setting for each of the following items:
• Group
• E-mail
• Internet Fax
• Fax
Select All: Select all items.
Clear Checked: Clear all selections.
Disable Registering Destination on
Web Page
(When network connection is enabled.)
This disables address control from the Web pages.
Configure the setting for each of the following items:
• Group
• E-mail
• FTP
• Desktop
• Network Folder
• Internet Fax
• Fax
Select All: Select all items.
Clear Checked: Clear all selections.
Disable Registration Using
Network Scanner Tool
(When network connection is enabled.)
This disables address control from the Network Scanner
Tool.
These settings can only be configured when there is
no received data in the machine's memory (excluding
data in a confidential or relay broadcast memory box).
Settings to Disable Registration