Sharp MX-7001 - Manual (Page 638)

35
*1 When a saddle stitch finisher is installed.
*2 When a large capacity tray is installed.
*3 When a saddle stitch finisher or finisher is installed.
*4 When an inserter is installed.
*5 When a punch module is installed.
*6 When a color-related problem has occurred.
■ Copy Function Settings
● Disabling of Devices 64
X Disabling of Document Feeder Disabled 64
X Disabling of Duplex Disabled 64
X Disabling of Large Capacity Cassette * 2 Disabled 64
X Disabling of Tray Setting Disabled 64
X Disabling of Finisher * 3 Disabled 64
X Disabling of Inserter * 4 Disabled 64
X Disabling of Offset Disabled 64
X Disabling of Stapler * 3 Disabled 64
X Disabling of Punch * 5 Disabled 64
X Disabling of Color Mode * 6 Disabled 64
● Fusing Control Settings 16 - 24 lbs. (60 - 90g/m 2 ) 64
Item Factory default setting Page
■ Copy Function Settings
65
● Initial Status Settings
65
X Color Mode Full Color
X Paper Tray Varies depending on the machine
configuration
X Exposure Type Auto
X Copy Ratio 100%
X 2-Sided Copy 1-Side to 1-Side
X Output –
● Other Settings 66
X Copy Exposure Adjustment
66 ‹ Color 5
‹ Black & White 5
X Rotation Copy Setting Enabled 66
X Add or Change Extra Preset Ratios – 66
X Setting a Maximum Number of Copies 999 66
Item Factory default setting Page