Sharp MX-7001 - Manual (Page 274)

45
SPECIFYING THE SCAN SIZE AND SEND SIZE
(Enlarge/Reduce Transmission)
When the original is placed, its size is automatically detected and displayed in the base screen.
The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.
In the above screen, the scan size (the placed original) is 8-1/2" x 11" (A4) and the send size is auto. If, for example, the
scan size were 8-1/2" x 11" (A4) and the send size were 5-1/2" x 8-1/2" (B5), the image would be reduced before
transmission.
• Only standard original sizes can be automatically detected.
☞
STANDARD SIZES (page 27)
• When the original size is a non-standard size, or if the size is not detected correctly, manually specify the original scan
size.
☞
Specifying the original scan size (by paper size) (page 46)
Specifying the original scan size (by numerical values) (page 48)
Auto Auto
Auto
USB Mem. Scan Fax Scan
Standard
Auto Reception
Fax Memory:100%
Internet Fax PC Scan
Scan: Send: 8½x11
File
Quick File
Address Review
Direct TX
Sub Address
Address Book
Special Modes
Resolution
Exposure
Original
8-1/2" x 11" (A4) The image is reduced
to 5-1/2" x 8-1/2" (B5)
before transmission
"Scan Size"
"Send Size" is set to
5-1/2" x 8-1/2" (B5)
Transmission