Sharp MX-7001 - Manual (Page 275)

46
Specifying the original scan size (by paper size)
If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original
size manually. Place the original in the document feeder tray or on the document glass and follow the steps below.
1
Touch the [Original] key.
The automatically detected original size appears to the right of
the [Original] key.
2
Touch the [Scan Size] key.
3
Specify the scan size.
(1) Touch the appropriate original size key.
(2) Touch the [OK] key.
• If you are sending a long original, touch the [Long Size] key. Use the automatic document feeder to scan a long
original. The maximum length that can be scanned is 31-1/2" (800 mm) (the maximum height is 11-5/8" (297 mm)).
• To specify an AB size for the scan size, touch the [AB Inch] key to highlight the [AB] side and then specify the
scan size.
Auto
Auto
Auto
USB Mem. Scan Fax Scan
Standard
Auto Reception
Fax Memory:100%
Internet Fax PC Scan
Scan: Send: 8½x11
File
Quick File
Address Review
Direct TX
Sub Address
Address Book
Special Modes
Resolution
Exposure
Original
Auto Auto 8½x11
Scan Size Send Size 100%
Fax/Original OK
2-Sided
Booklet 2-Sided
Tablet
Image Orientation
Manual
8½x11R 5½x8½ 11x17
8½x13(213x330) 5½x8½R
Auto
Fax/Original
Manual
8½x14 8½x11 Long Size
OK
Inch
AB
Size Input
(2) (1)