Silex technology Mini Print Server PRICOM SX-300U - Manual (Page 133)

8-4 Functions for Configuration
Users Manual SX
On the AdminManager menu bar, select
Settings, then Set IP address to start IP
address configuration tool.
Before setting up PRICOM, verify that it can be discovered by AdminManager. If not, select
Settings, then assign an IP address.
Assigning an IP address
Assign an IP address manually.
-Before assigning an IP address, verify PRICOM Ethernet address. The address can be
found on the self-diagnostic print sheet. (e.g. 00:80:92:34:c0:19)
1.
2.
Searching PRICOM Using AdminManager
To activate the IP address, reset
PRICOM.
-Restart process of AdminManager may not work depending on printer type.
In that case, switch off and on the printer power.
3.
Enter Ethernet address and IP address
of PRICOM to be configured.
Click OK.
NOTE
TIP