Silex technology Mini Print Server PRICOM SX-300U - Manual (Page 77)

5-8 Using PRICOM in UNIX/Linux Environment
Users Manual SX
2. Printing
2-1 This section explains how to print using [lp] command. For more details, refer to Solaris manual.
# lp -d pboxlp <Name of print file>
This causes the banner page to be automatically printed.
To disable the banner printing feature, add the following option, “-o nobanner”.
# lp -d pboxlp -o nobannert <Name of print file>
Alternatively, type,
# lpadmin -p pboxlp -o nobanner
directly edit the filter file generated under /etc/lp/interfaces.
Either of these options disables banner print function.
Example: Using an editor e.g. vi, open the file shown below. Change “nobanner=no” to
“nobanner=yes”.
# vi /etc/lp/interfaces/pboxlp
nobanner=no ---> nobanner=yes
3. Cancel the print request.
3-1 Use “cancel” command to cancel the current print job request.
- Depending on the timing or Solaris specification, canceling attempt will fail.
4. Check the printer status
4-1 Use “lpstat” to verify the printer status.
# lpstat -p pboxlp
-Depending on the UNIX specification, the command will fail to correctly display the printer status.
TIP
TIP