Silex technology Mini Print Server PRICOM SX-300U - Manual (Page 168)

10-7 FAQ
Users Manual SX
When the PC and PRICOM are not on the same segment, a subnet mask and gateway
address must be configured on PRICOM. Use AdminManager or PRICOM web page to
verify that subnet mask and gateway address are correctly configured.
If DHCP/BOOTP server or RARP server resides on the network, the IP addresses are
assigned automatically, which may rewrite the IP address that you have manually
assigned to PRICOM. To avoid this problem, uncheck Use DHCP/BOOTP check box
and configure the IP address again.
Error during printing
Dial-up connection box appears when printing job is executed.
If you try to print while other users are printing large data (e.g. many pages or color
pages with high resolution), the printer is unable to accept your print job until the
ongoing print is finished. If the waiting time of your print job exceeds a certain limit,
a time out occurs, which causes the error message. In such case, execute the
print job again afterwards.
Printing will be complete after you cancel this dial box to shift the process to LAN adapter
from the dial-up adapter. This problem is caused due to Windows specifications.
CHECK1
CHECK2
CHECK
CHECK