Silex technology Mini Print Server PRICOM SX-300U - Manual (Page 165)

10-4 FAQ
Users Manual SX
-Make sure that the printer is activated, also that the cable/ HUB port is not defective.
-Send PING command from MS-DOS to verify the proper communication between
your PC and other PCs in the network.
-Verify that the PRICOM has been initialized to factory default.
* For the procedure to initialize PRICOM to factory default, refer to chapter 2.
-DHCP or RARP server may exist in the network.
* An inappropriate IP address may have been assigned to PRICOM by Rooter or
the servers. Configure IP address in a local environment where rooter or server do
not exist (one PC, one HUB, one printer and one PRICOM exist in the environment).
-PRICOM and the PC you are using for the configuration may not be in the same
segment.
*Verify that PRICOM and the PC you are using for the configuration are in the
same segment.
Communication error occurs while configuring IP address
CHECK