Silex technology Mini Print Server PRICOM SX-300U - Manual (Page 139)

8-10 Functions for Configuration
Users Manual SX
2. Configure NetWare.
3. Select the NetWare server operation mode.
4. Select the file server name to create a print queue.
-The next screens to be displayed may vary depending on the NetWare server selected.
NetWare3 or below will go to -> 5 (A)
NetWare4 or above will go to -> 5 (B)
When NetWare 4 or above file server is selected, print server mode will be automatically selected.
Click Next.
Click Next.
Click Next.
Select the file server name.
Select Bindary Mode.
TIP