Silex technology Mini Print Server PRICOM SX-300U - Manual (Page 25)

3-2 How to Install
Users Manual SX
1. Connect the AC adapter to PRICOM.
2. Insert the power cable of printer into
an electrical outlet.
3. Connect a network cable from an
Ethernet HUB to PRICOM.
4. Use a USB cable to connect
PRICOM(type A connector)to a printer
(type B connector)
<USB connector shape>
- Refer to the following chapter about how to install on each OS.
A Type
B Type
- The following explanation is based on using a printer.
- Be sure that PRICOM is powered on prior to powering up the connected USB device.
PRICOM SX-300U
Ethernet HUB
AC Adapter Cable
Power Cable
How to Connect PRICOM to a Printer
- The shape of the connectors on a USB cable have 2 different types.
OS Chapter
Windosws 4
UNIX/Linux 5
Netware 6
Macintish 7
NOTE
TIP