Silex technology Mini Print Server PRICOM SX-300U - Manual (Page 80)

5-11 Using PRICOM in UNIX/Linux Environment
Users Manual SX
This section explains how to print from Hewlett-Packard HP-UX.
Command absolute path and configuration method may vary depending on OS version.
Refer to your workstation manual for more details.
1. Set the remote spooler.
When HP-UX machine is not configured to remote spooler, follow with the below configuration.
1-1 Log in to the UNIX machine by “root”.
# login root
1-2 Cancel the printer spooler.
#/usr/lib/lpshut
1-3 Register remote spooler by adding the line shown below to /etc/inetd.conf file.
printer stream tcp nowait root /usr/lib/rlpdaemon -i
1-4 Reboot inetd.
#/etc/inetd -c
2. Prepare the print queue.
2-1 Log in to the UNIX machine through “root”.
# login root
2-2 Configure print queue.
Example: Register the print queue name as “pboxlp”:
#/usr/lib/lpadmin -ppboxlp -mrmodel -ormpbox
-orplp -ocmrcmodel -osmrsmodel -ob3 -v/dev/null
-The “lp” following “-orp” represents the name of PRICOM remote printer.
(Print queue name)
(Remote printer name)
(Host name)
NOTE
Running PRICOM in HP-UX 9.x/10.x Environment