Silex technology Mini Print Server PRICOM SX-300U - Manual (Page 170)

10-9 FAQ
Users Manual SX
Question regarding NetWare
PRICOM can not establish the connection with NetWare
From the AdminManager or the PRICOM Web page, verify the proper configuration for
"Frame Type", "Mode".
-The automatic changeover of NetWare operation mode on PRICOM may require some
time depending on the operating environment.
When two or more PRICOMs are used, make sure that the printer name (NetWare
printer name) is not duplicated.
PRICOM can not establish the connection with NetWare server (RPRINTER
mode)
Click Print server, then Printer list, then Current status on NetWare server to verify if
the PRICOM is operating properly.
Make sure that the Print Server Name specified on the PRICOM is the same as that of
the print server operating on your file server.
NOTE
CHECK1
CHECK2
CHECK1
CHECK2