Silex technology Mini Print Server PRICOM SX-300U - Manual (Page 99)

6-1 Using PRICOM in NetWare
Users Manual SX
This chapter explains how to configure PRICOM and NetWare server to print from a NetWare
environment.
-For how to connect to PRICOM to printer, Refer to chapter 2.
-Make sure the Novell client software has already been installed on the client and
NetWare server is on the network.
-Make sure to install printer driver before you start using PRICOM.
-NetWare server can be configured by either silex configuration utility (Quick Setup or
AdminManager) or Novell utility, PCONSOLE.
-When configuring by AdminManager, refer to Chapter 8.
<Preparation for printing in NetWare environment>
In case of initial installation and printing In case of printing
(Administrator) (Client)
Configure printer port
Configure using Quick Setup Configure printer port
NOTE
TIP
6. Using PRICOM in NetWare