Savin G1619 - Manual (Page 119)

Printing Options
31
4
Reception Time
When this function is turned on, you
can have the date and time when a
message was received printed at the
bottom of the received image. Turn it
on or off with the User Parameters
(Switch 02 Bit 2). See p.58 “User Pa-
rameters”.
Limitation
❒ When a received message is print-
ed on two or more sheets, the date
and time is printed on the last
page.
Note
❒ The date and time when the mes-
sage was printed can also be re-
corded on the message. If you need
this function, please contact your
service representative.
Page Separation and Length
Reduction
When the size of a received message
is longer than the paper loaded in the
machine, each page of the message
can be split and printed on several
sheets, or reduced and printed on a
single sheet. For example, When the
paper size is A4
L, this function
splits the message if the message
length is 92mm (3.7”) or longer than
the paper used. The message is re-
duced if it is less than 92mm (3.7”).
When the paper size is 8
1 /
2
"
×11” L,
this function splits the message if the
message length is 85mm(3.4”) or
longer than the paper used. The mes-
sage is reduced if it is less than
85mm(3.4”). When a message is split,
the split mark (*) is inserted at the
split position and about 10mm (0.4”)
of the split area is duplicated on the
top of the second sheet.
Note
❒ This function is not available in
some countries.
❒ Your service representative can
customize this function with the
following settings.
• Reduction
• Print split mark
• Overprinting
• Guideline for split
ABC
(Document)
ND1X01E1