Savin G1619 - Manual (Page 12)

Getting Started
2
1
Guide to Components
Front View
Following illustration is for Model B.
1. Exposure Glass Cover
Lower the Exposure Glass Cover over
originals placed on the exposure glass.
2. Document Feeder (ADF) (Option
for Type1)
Originals will be fed automatically.
3.
Exposure Glass
Place the original face down on the upper
left corner of the exposure glass, aligning
the upper left corner with the reference
mark. Close the exposure glass cover
when you set a document on the expo-
sure glass.
4.
Handset (Option)
This permits voice communication.
5. main power switch
If the machine does not operate after
turning on the operation switch, check if
the main power switch is turned on. If it
is off, turn it on. However, if the machine
is installed with the fax option, do not
turn the main power switch off.
Note
❒ The main power switch is normally
set by your service representative. Do
not touch this switch.
❒ When you press the operation switch
and there is still no power, turn on the
main power switch.
❒ If you leave the main power switch off
for more than 12 hours, all files in
memory are lost.