Savin G1619 - Manual (Page 51)

Quick Dial
41
3
JJJJ
Press the
{{{{Clear/Stop}}}} key, and then
reenter the destination name.
Note
❒ Under rare circumstances, gar-
bled characters may appear
during name registration if you
use the
{{{{Pause/Redial}}}} key to
display the fax number of par-
ties located in other countries. If
this happens, simply delete the
garbled characters using
0 or
1 and the {{{{Clear/Stop}}}} keys,
and then go on to enter the
name.
KKKK
Press the
{{{{OK}}}} key.
The name is programmed.
LLLL
Press
0 0 0 0 or 1 1 1 1 to select either "On"
or "Off".
Note
❒ Label insertion allows the re-
c e i v e r ' s n a m e t h a t i s p r o -
grammed in Quick Dial or
Speed Dial to be printed on the
fax when it is received at the
other end. See Chapter 1 “Label
Insertion” in the Advanced Fea-
tures manual.
MMMM
Press the
{{{{OK}}}} key.
If you want to store another Quick
Dial, go to step
E.
NNNN
Press the
{{{{User Tools}}}} key to re-
turn to standby display.
Deleting
The following procedure describes
how to delete fax numbers registered
in Quick Dial keys.
Limitation
❒ When a Quick Dial key is being
used for a standby Memory Trans-
mission, the message "
This Dial
is in Use. Cannot Delete.
" is
shown and you cannot delete the
destination for this key.
AAAA
Press the
{{{{User Tools}}}} key.
BBBB
Press
0 0 0 0 or 1 1 1 1 until " 4. Fax Fea-
tures " is displayed.
CCCC
Press the
{{{{OK}}}} key.
Confirm that " 1. Program / Delete
" is displayed.
DDDD
Press the
{{{{OK}}}} key.