Savin G1619 - Manual (Page 27)

Memory Transmission
17
2
BBBB
Set the original.
Limitation
❒ You can send the first pages
from the exposure glass, and
then the remaining pages from
the Document Feeder. After you
place the last page on the expo-
sure glass, you have 60 seconds
to insert the remaining pages in
the Document Feeder.
❒ Note that you cannot place pag-
es on the exposure glass after
you have started using the Doc-
ument Feeder.
❒ Do not open the Document
Feeder while it is scanning in
originals.
Note
❒ Place the original you want to
store in memory on the expo-
sure glass or the Document
Feeder. To store multiple page
originals from the exposure
glass, set them page by page.
Reference
p.13 “Setting Originals”
CCCC
Select any scan settings you re-
quire. See p.24 “Scan Settings”.
DDDD
Dial. If you wish to send the same
message to more than one desti-
nation, press the
{{{{OK}}}} key, and
then dial another destination. Re-
peat this step for all destinations.
If you make a mistake, press the
{{{{Clear/Stop}}}} key, and then enter the
correct number again.
Note
❒ When specifying a destination
using a Quick Dial, the destina-
tion is added even if you did not
press the
{{{{OK}}}} key.
Reference
p.26 “Dialing”
EEEE
Press the
{{{{Start}}}} key.
The machine starts scanning the
original.
The machine calls the destination.
The name or fax number which is
programmed as the Own Name or
Own Fax Number at the other end
is shown on the top of the display.
Reference
p.33 “Own Name/Fax Head-
er/Own Fax Number”
After transmission, the machine
will return to standby mode.