Savin G1619 - Manual (Page 89)

1
1. Transmission Options
Sending at a Specific Time (Send Later)
Using the Send Later function, you
can delay transmission of your fax
message until a specified time. This
allows you to take advantage of off-
peak telephone line charges without
having to be by the machine at the
time of transmission.
Note
❒ You can not specify a time more
than 24 hours later.
❒ This function is only available with
Memory Transmission.
AAAA
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
BBBB
Place your original and select any
scan settings you require.
CCCC
Press the
{{{{Transmission Option}}}} key.
DDDD
Confirm that " 1. Send Later " is
displayed.
EEEE
Press the
{{{{OK}}}} key.
FFFF
Press
0 0 0 0 or 1 1 1 1 to select "On".
GGGG
Press the
{{{{OK}}}} key.
HHHH
Press
0 0 0 0 or 1 1 1 1 to select “AM” or
“PM”.
IIII
Press the
{{{{OK}}}} key.
JJJJ
Enter the time that you want to
send the fax message with the
number key.
Enter the hour setting (1 to 12).
Then press
0 or 1.
Then enter a 2-digit number for the
minute setting (00 to 59).
Note
❒ When entering numbers small-
er than 10, add a leading zero.
❒ If you make a mistake, press the
{{{{Clear/Stop}}}} key and try again.
❒ If the current time shown on the
display is not correct, change it.
See p.43 “Setting the Date and
Time”.
Transmitter
Send Later
at 21:00 (9:00PM)
Receiver
ND1X01E4