Savin G1619 - Manual (Page 156)

Key Operator Settings
68
6
PSTN Access Number
Use this setting to save having to en-
ter a pause after the PSTN access
number when dialing. When you pro-
gram an access number, a pause is au-
tomatically added as soon as that
number is pressed. For example, if
you register "0" as the PSTN Access
Number, a pause will be inserted au-
tomatically after dialing "0".
Limitation
❒ PSTN access numbers can be up to
2 digits long.
❒ This function does not work when
using On Hook mode or when di-
aling from an external telephone.
Note
❒ After you have registered PSTN
access number, select the line to
PABX on User Parameters (Switch
13 Bit 0).
To register an PSTN access number,
perform the following procedure.
AAAA
Press the
{{{{User Tools}}}} key.
BBBB
Press
0 0 0 0 or 1 1 1 1 until " 4. Fax Fea-
tures " is displayed.
CCCC
Press the
{{{{OK}}}} key.
DDDD
Press
0 0 0 0 or 1 1 1 1 until " 4. Key Op.
Tools " is displayed.
EEEE
Press the
{{{{OK}}}} key.
FFFF
Press
0 0 0 0 or 1 1 1 1 until " 7. PSTN Ac-
cess No." is displayed.
GGGG
Press the
{{{{OK}}}} key.
HHHH
Enter the PSTN access number (2-
digits) with the number keys.
If you make a mistake, press the
{{{{Clear/Stop}}}} key and try again.
IIII
Press the
{{{{OK}}}} key.
" Programmed " is displayed.
JJJJ
Press the
{{{{User Tools}}}} key to re-
turn to the standby display.