Savin G1619 - Manual (Page 59)

Groups
49
3
Groups
If you regularly broadcast documents
to the same set of destinations, you
can combine these numbers into a
group. Then just select the group and
each number will be dialed in se-
quence automatically.
There are two ways of programming
Groups:
❖ ❖ ❖ ❖ Registering groups in Quick Dial keys
If you register a group in a Quick
Dial key, you can specify that
group by pressing a Quick Dial
key. However, if you use Quick
Dial keys to register groups, you
will be able to register fewer Quick
Dial keys .
Limitation
❒ You cannot register another
function (Quick Dials) in a
Quick Dial key already used for
a group. Also, you cannot regis-
ter groups in a Quick Dial key
already used for another func-
tion.
❖ ❖ ❖ ❖ Assigning the Group Functions to the
Group key
To assign the Group Function to
the Group key, you must first as-
sign the Group function to a User
Function key. To send a fax, press
the Group key, and then enter the
group number (1 to 5). To select a
Group using a Group key, one
more step is required than when
using a Quick Dial key. However,
multiple Groups (a maximum of
five) can be stored in a Group key,
thus leaving the Quick Dial keys to
be used more effectively.
Registering
You can register the following items
in a Group:
• Destination fax numbers
• Group name (up to 20 characters)
You can enter destination numbers by
Quick Dial keys, Speed Dials, or the
number keys.
Note
❒ You can register up to 5 Groups.
❒ The maximum number of destina-
tions you can register in a Group is
133.
❒ The combined maximum number
of destinations you can register in
all Groups is 133. This 133 can be
composed of up to 16 Quick Dial
numbers, 50 Speed Dial numbers
and 67 numbers entered directly
with the number keys.
❒ The number of destinations that
can be registered with the number
keys depends on how the machine
is used. In theory you can register
up to a combined maximum of 67
destinations with the number keys
for all groups.
❒ If you register 67 destinations with
the number keys, Memory Trans-
mission using the number keys be-
comes unavail abl e, a nd onl y
Immediate Transmission is avail-
able.
❒ If you register a Group with the
number keys when a file is waiting
to be transmitted, a message is
shown. You sometimes cannot reg-
ister any more destinations even
when the number of specified des-
tination is 66 or less.