Seagate Fibre Channel Interface - Manual (Page 150)

136 Fibre Channel Interface Manual, Rev. D
Field definitions (listed alphabetically)
Burst Length
The amount of data (in bytes) requested by the drive for transfer in this Fibre Channel sequence. The maximum length the
drive will request is the remaining data to complete the transfer, the Maximum Burst Size in the Disconnect/Reconnect
SCSI mode (page 2), or the maximum length that may be transferred in a Fibre Channel sequence, whichever is less.
Relative Offset
The byte offset of the requested transfer relative to the first byte of the data addressed in the CDB.
Table 81: FCP XFER RDY Payload
Bit
Byte 7 6 5 4 3 2 1 0
0 (MSB)
Relative Offset
1
2
3 (LSB)
4 (MSB)
Burst Length
5
6
7 (LSB)
8 (MSB)
Reserved
9
10
11 (LSB)
Table
number
81
81