Seagate Fibre Channel Interface - Manual (Page 69)

Fibre Channel Interface Manual, Rev. D 55
9.1.3 Basic Reject (BA_RJT)
BA_RJT is sent by the drive in response to an ABTS with a RX_ID not set to FFFFh.
The R_CTL is 85h.
Field definitions (listed alphabetically)
Reason Code
03h
(Logical Error) is the only Reason code sent by the drive if the RX_ID sent with the ABTS is not FFFFh.
Reason Explanation
03h
No Additional Explanation. This is the only Reason Explanation code sent by the drive.
Vendor Unique
Not supported by the drives described in this manual.
Table 20: BA_RJT Payload
Bit
Byte 7 6 5 4 3 2 1 0
0 Reserved
1 Reason Code
2 Reason Explanation
3 Vendor Unique
Table
number
20
20
20