Seagate Fibre Channel Interface - Manual (Page 203)

Fibre Channel Interface Manual, Rev. D 189
Table 121 summarizes the Log Select Command field settings used when updating the cumulative/threshold value settings
and the resulting action that will occur based on these field settings.
The Log Select and Log Sense commands use the same log page format. See Section 12.10.
Table 121: Log Select Command field setting summary
PCR PC
Parameter
List Length
Resulting action
1 xx 0
All cumulative counter and threshold log page values will be set to “zero” on all
log pages.
0 11 0
All cumulative counter log page values will be set to “zero” on all log pages.
0 10 0
All threshold log page values will be set to “zero” on all log pages.
0 01 nn
The cumulative counter for a specific parameter code will be set to the stipu-
lated value on a specified log page as found in the Log Parameter Page data.
0 00 nn
The threshold for a specific parameter code will be set to the stipulated value
on a specified log page as found in the Log Parameter Page data.