Seagate Fibre Channel Interface - Manual (Page 96)

82 Fibre Channel Interface Manual, Rev. D
Page Length
The length must be in the range of 10h to 14h.
Payload Length
Length of TPRLO payload (in bytes). The count includes the LS Command Code. The drive supports one service parame-
ter page per TPRLO. The Payload Length must be in the range of 14h to 18h.
Process Associators
Not supported by the drive. The originator and responder process associator valid bits must be set to zero (0). The process
associator fields are not checked by the drive.
Third Party Originator N_Port ID
This field specifies the N_Port address associated with the process login to be removed.
Third Party Originator N_Port ID Validity
00h
Third Party Originator N_Port ID field is not valid.
01h Third Party Originator N_Port ID field is valid.
Type Code
00h
All FC-4 processes between the initiator and target are removed. The drive treats 08h and 00h the same.
08h The SCSI-FCP process will be removed.
Type Code Extension
Not defined for SCSI-FCP and must be zero (0).
43
43
43
43
43
43
43