Seagate Fibre Channel Interface User Manual

Page 379

Advertising
background image

Fibre Channel Interface Manual, Rev. D

365

Beginning Running Disparity

The Running Disparity present at a transmitter when Encoding of the Special Code associated with an Ordered
Set is initiated, or at a receiver when Decoding of the Special Character associated with an Ordered Set is ini-
tiated.

BER

See Bit error rate.

Bit error rate (BER)

The statistical probability of a transmitted bit being erroneously received in a communication system. The BER
is measured by counting the number of erroneous bits at the output of a receiver and dividing by the total num-
ber of bits.

Bit synchronization

The state in which a receiver is delivering retimed serial data at the required BER.

Block

A upper level construct of application data related to a single Information Category and transferred within a sin-
gle Sequence.

BNC

Acronym for a Bayonet-Neil-Councilman Coaxial Cable Connector. Specifications for BNC style connectors are
defined in EIA/TIA 403-A and MIL-C-39012.

BSY

Busy.

Buffer

A logical construct which holds the contents of a single frame.

Byte

An eight-bit entity with its least significant bit denoted as bit 0 and most significant bit as bit 7. The most signifi-
cant bit is shown on the left side in FC-PH, unless specifically indicated otherwise. Bytes are packed four per
32-bit word, or eight per 64-bit word.

Cable plant

All passive communications elements (e.g., optical fibre, twisted pair, or coaxial cable, connectors, splices,
etc.) between a transmitter and a receiver.

CATV

Central Antenna Television.

CClTT

Comite Consultatif International, Telegraphique et Telephonique (see ITV-TS).

CDB

Command descriptor block.

Advertising
This manual is related to the following products: