Seagate Fibre Channel Interface User Manual
Page 186
172
Fibre Channel Interface Manual, Rev. D
RelAdr (Relative Addressing)
This function is not supported by drives described in this manual.
Reserved
Byte 56 through byte 95 are filled with 00h.
Response Data Format
0
The Inquiry data format is as specified in the ANSI SCSI-1 standard.
1
Indicates compatibility with some products that were designed prior to the development of the ANSI SCSI-2 stan-
dard (i.e., CCS).
2
Indicates that the data is in the format specified in the SCSI-2 standard.
> 2
Values greater than two are reserved.
Soft Reset
0
The drive responds to the Reset condition with the hard Reset alternative.
1
The drive responds to the Reset condition with the soft Reset alternative.
TRMIOP (Terminate I/O Process)
0
The disc drive does not support the Terminate I/O Process message.
TrnDis (Transfer Disable)
Not supported.
Vendor Identification
The ASCII data containing the vendor name (“SEAGATE”).