SmartBridges sB3010 - Manual (Page 23)

Page 23 of 82
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul™ Nexus User Guide
Figure 2-10 Changing Remote Bridge to Root Bridge
2.5.4 Remote Router to Root Bridge
Follow the steps below to change Remote Router mode to Root Bridge mode:
1. Go to Tools | System Configuration drop down menu. The System Configuration will be
displayed as shown below.
2. Alternatively, click on the Current Device Mode link on the top right hand corner to go to the
System Configuration page.
3. Choose Root Bridge option and Click on Apply Changes. A confirmation pop-up window
will be displayed.
4. Enter IP Address, IP Mask and Gateway for Ethernet Configuration.
5. Click on the Apply Changes button to change the settings. The device will be rebooted and
set to the chosen operational mode.