SmartBridges sB3010 - Manual (Page 24)

Page 24 of 82
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul™ Nexus User Guide
Figure 2-11 Changing Remote Router to Root Bridge
2.5.5 Remote Router to Remote Bridge
Follow the steps below to change Remote Router mode to Remote Bridge Mode:
1. Go to Tools | System Configuration drop down menu. The System Configuration will be
displayed as shown below.
2. Alternatively, click on the Current Device Mode link on the top right hand corner to go to the
System Configuration page.
3. Choose Bridge under the Remote Device option.
4. Click on Apply Changes. A confirmation pop-up window will be displayed.
5. Enter IP Address, IP Mask and Gateway for Ethernet Configuration.
6. Enter the MAC address and the SSID of the remote radio.
7. Enter the Channel and Domain.
8. Click on the Apply Changes button to change the settings. The device will be rebooted and
set to the chosen operational mode.