SmartBridges sB3010 - Manual (Page 25)

Page 25 of 82
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul™ Nexus User Guide
Figure 2-12 Changing Remote Router to Remote Bridge
2.5.6 Remote Bridge to Remote Router
Follow the steps below to change Remote Bridge mode to Remote Router mode
1. Go to Tools | System Configuration drop down menu. The System Configuration will be
displayed as shown below.
2. Alternatively, click on the Current Device Mode link on the top right hand corner to go to the
System Configuration page.
3. Choose Router under the Remote Device option.
4. Click on Apply Changes. A confirmation pop-up window will be displayed.
5. Enter IP Address, IP Mask and Gateway for Ethernet Configuration and Wireless
Configuration.
6. Enter the SSID and the Domain of a remote radio.
7. Click on the Apply Changes button to change the settings. The device will be rebooted and
set to the chosen operational mode.