SmartBridges sB3010 - Manual (Page 66)

Page 66 of 82
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul™ Nexus User Guide
7.3. Link Test
Link Test utility is available from the navigation menu bar Tools | Link Test drop down menu. From
Link Test tools, the user can test Throughput and perform Ping Test. User needs to run Radio
Transmit on one radio and Radio Receive on the other to run the Throughput test.
User has to specify the IP address for the test.
Follow the steps below to do a Ping Test:
1. Enter a valid IP address for Far-end Radio IP Address.
2. Click on the ‘Start’ button under ‘Ping’. The Ping result will be displayed.
3. Click the ‘Stop’ button to stop the test.
Figure 7-7 Ping Test Result
The Link Test page for Remote Devices shows the SSID of the Remote Device, Association status
and the channel.