SmartBridges sB3010 - Manual (Page 59)

Page 59 of 82
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul™ Nexus User Guide
The following page summarizes the page contents of the System Configuration page.
Table 7-1 System Configuration
Page Item Descriptions
System Name
Displays name of airHaul unit
Allows user to change airHaul unit name
System Description Displays description of airHaul unit
Allows user to change airHaul unit description
SNMP Security Access the SNMP security settings
Reset Reset device
Delayed Reset Schedule a reset
NTP Server NTP server setup, as well as NTP time if server is setup
Software Version Display the installed firmware version
Radio Firmware
Version
Display the installed radio firmware version
Edit Configuration Provide links to edit IP, radio, configurations
Reset To Factory
Defaults
Resets the device to factory default settings
Ethernet MTU Size Set the Ethernet MTU Size
Syslog server IP
Address
Display the current message syslog server IP Address.
User can change the IP address.
SNMP Trap IP
Display the current SNMP trap IP address.
User can change the IP address.
Log Level Display the current Log Level
Watch Guard
Suspends/Enables the radio defenders.
If the Watch Guard is Suspended the defenders will stop for 2 hours and
start again thereafter.
If the Watch Guard is enabled the radio defender’s will start immediately.
Note: The Radio Defenders will monitor the Wireless Association Status
(automatically) and traffic and take corrective action if needed.
LED Control
Display the current led on status.
User can change the LED status to on/off
Current
Operational mode
Display the current operational mode.
User can change the current operational mode.