SmartBridges sB3010 - Manual (Page 48)

Page 48 of 82
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul™ Nexus User Guide
Figure 2-33 WEP Configurations
Follow the steps below to disable the Data Encryption:
1. Click the ‘Security’ link from the ‘Radio Main’ page.
2. If it is in Shared key mode, please set to Open System before you click Disable.
3. Click the ‘Disable’ button on the WEP.
4. Click the ‘Apply Changes’ button to change the settings.
Figure 2-34 Data Encryption Disabled
WPA-PSK:
In order to configure WPA-PSK in Remote Router mode, follow the steps below:
1. Click the ‘Security’ link from the ‘Radio Main’ page.
2. Select the WPA-PSK from the drop down menu of the Security Mode.
3. Enter the WPA-Shared Key (ASCII) of between 8 to 64 characters in the dialog box provided.
4. Select the Encryption Type between TKIP and AES.
5. Click on the ‘Apply Changes’ button to save the configuration details.
Table 2-6 WPA Descriptions
Page Items Descriptions
WPA-PSK WPA-PSK is an extra-strong encryption where encryption keys are
automatically changed (called re-keying) and authenticated between