Identification of features – Samsung Digimax 250 User Manual
Page 14
14
Identification of features
Camera status lamp
Beep
Beep sound
Camera condition
Error beep (long beep twice and
short beep twice)
Normal beep (a short beep)
When an error occurs
Rotating the mode dial/
pressing the camera buttons
Power beep
When the camera power is turned on/off.
Self-timer beep
Beeps simultaneously with the Self-timer lamp blinking.
- To hear the beep sound, you have to set the beep sound to on in the setup mode menu.
Color
Status
Camera Status
Blinking and off
Power on processing
When the LCD monitor is turned off
When the USB cable is connected
When the camera is in focus
While saving an image
While transferring data between the camera and a PC
When the camera is out of focus
Blinking slowly
While the flash is charging
Flash is ready
(when the SHUTTER button is pressed halfway)
- For the first seven seconds, the LED blinks at 1second intervals.
- For the final three seconds, the LED blinks quickly at 0.5-
second intervals.
Blinking once
When the camera’s power is on / when the shutter button is released.
On
On
Blinking
Blinking fast
Autofocus
indicator
lamp
(Green)
Flash
indicator
lamp(Red)
Self-timer
lamp(Red)