Samsung Digimax 250 - Manual (Page 69)

69
Latest
The most recent changes made to the camera setting values since [LATEST] has been set to
[YES] will be maintained. The changed setting values are maintained even after the camera
is turned off and then back on.
Saving Camera Functions
1. In any mode other than Voice Recording mode or
MySET mode, press the MENU button.
2.Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LATEST] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- If [NO] is selected : The changed camera functions will not be saved.
- If [YES] is selected : The changed camera functions will be saved.
5. Press the menu button twice and the menu will disappear.
The menus to which the changed values are saved regardless of the Latest function are as
follows : SIZE, QUALITY, PHOTO FRAME, START IMAGE, and all SETUP menus
When the [LATEST] is [YES], the menus to which the changed values are always saved are
as follows: FLASH, METERING, EXPOSURE COMPENSATION, SHARPNESS, EFFECT,
and WHITE BALANCE.
Start image
You can select the image that is first displayed on the LCD monitor whenever the camera is
turned on.
Setting a Startup Image
1. In any mode other than Voice Recording mode, press
the MENU button.
2. Press the LEFT/ RIGHT button and select the [START
IMAGE] menu tab.
3 Select the [IMAGE] menu by pressing the UP/ DOWN
button and press the RIGHT button.
- If [OFF] is selected: The startup image will not be
displayed.
- If [IMAGE 1, IMAGE 2] is selected: The Samsung brand logo will be displayed.
- If [IMAGE 3] is selected: The startup image you created in [RESIZE] will be displayed.
SETUP
Q. VIEW
RESET
LATEST
BACK: SET:OK
NO
YES
START IMAGE
OFF
IMAGE 1
IMAGE 2
IMAGE 3
AWB 1600