Samsung Digimax 250 - Manual (Page 55)

55
Starting the slide show
The loading time depends on the image size and quality.
The slide show will start from an image that was displayed on the LCD monitor.
The auto power off function can't be activated.
While the slide show is playing, only the first frame of an mov file is displayed.
INFORMATION
Images can be displayed continuously at pre-set intervals. You can view the slide show by
connecting the camera to an external monitor. (p.67)
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [SLIDE]
menu tab.
3. Press the DOWN button.
4. Use the UP and DOWN buttons to select the desired
submenu value, and then press the RIGHT button.
- Slide Show Display Interval : OFF, 1~10SEC
5. Use the UP and DOWN buttons to select the Repeat
Slide Show menu.
- [ON] : Even once a cycle(from the first image to the
last image) is completed, the slide show will
continue to repeat itself.
- [OFF]: If a cycle is completed, the slide show will stop
automatically.
6. Press the OK button and the slide show will start.
- To pause the slide show, press the play & pause button.
- To start the slide show again, press the play & pause button again.
- Press the menu button again and the slide show will stop.
SLIDE
OFF
EXIT:MENU MOVE:
SLIDE
REPEAT
ON
OFF
2SEC
SET:OK BACK: