Samsung Digimax 250 - Manual (Page 33)

33
+/- button
A negative exposure compensation value reduces the exposure. Note that a positive
exposure compensation value increases the exposure and the LCD monitor will appear
white or you may not get good pictures.
INFORMATION
You can use the +/- button to adjust the values for the exposure compensation.
Exposure compensation : This camera automatically adjusts the exposure according to the
ambient lighting conditions. You can also select the exposure value by using the +/- button. In
Still image, MySET and Photo Frame mode, the exposure compensation can be adjusted
between -2.0EV and +2.0EV (at 0.5EV increment), and in Night Scene mode, you can set the
Longtime shutter.
Compensating Exposure
1. When you press the +/- button, the exposure
compensation menu bar and the exposure
compensation icon ( ) will appear as shown.
2. Use the LEFT and RIGHT buttons to set the desired
exposure compensation factor ( Ev).
3. Press the +/- button again. The value you set will be
saved and the Exposure Compensation setup mode will
close. If you change the exposure value, the exposure
indicator ( ) will be displayed on the bottom of the
LCD monitor.
Setting the Long-time Shutter (Night Scene mode)
1. Turn the Mode Dial to select Night Scene mode.
2. Press the +/- button. Available shutter speeds will be
displayed as shown in the picture.
3. Use the LEFT and RIGHT buttons to select the desired
shutter speed.
4. Press the +/- button. The menu will disappear and the
long-time shutter speed will be set. Then the long-time
shutter icon ( LT ) will be displayed at the bottom right of
the LCD monitor.