Samsung Digimax 250 - Manual (Page 58)

58
Copying
This function will not work without the card inserted into the camera.
When you perform [COPY TO CARD], if the amount of free space on the memory card
is less than the total size of the images you selected from the internal memory (6MB),
only as many images as space allows will be copied. After the images have been copied,
if there is insufficient memory space, the [CARD FULL!] message will be displayed when
you rotate the Mode Dial to Movie Clip or Still Image. Please be sure to delete any
unnecessary images to free up space before inserting the memory card into the camera.
When you move the images that are stored in the internal memory by doing [COPY TO
CARD] to the card, 101SSCAM folder will be created in the card to avoid duplication of
the sub folder name. Whenever you carry out the [COPY TO CARD] function, the
number of SSCAM folder increases. (Ex : 100SSCAM, 101SSCAM, 102SSCAM,
103SSCAM...) After completing [COPY TO CARD], the last stored image of the last
copied folder is displayed on the LCD monitor. When you take an image, the image is
stored in the last copied folder.
INFORMATION
This enables you to copy image files to the memory card.
Copy to card
1. Press the play mode button and press the MENU
button.
2. Select the [COPY TO CARD] menu tab by pressing the
LEFT/ RIGHT button.
3. Select the desired sub menu by pressing the
UP/DOWN button and press the OK button.
- If [NO] is selected: Images will not be copied to the
card and the mode will switch to PLAY mode.
- If [YES] is selected: All images on the internal memory
will be copied to the memory card.
COPY TO CARD
NO
YES
EXIT:MENU MOVE: