Samsung Digimax 250 - Manual (Page 39)

39
Metering
If the subject is not the centre of the focus area, do not use the spot metering as this may
result in an exposure error. In this circumstance, rather use exposure compensation.
INFORMATION
[ Spot metering zone ]
SPOT ( ) : The indicated area at the centre will
be metered, as shown on the right.
This is suitable when the subject at
the center is exposured correctly
regardless of back lighting.
Shooting
[ STILL IMAGE mode ]
[ STILL IMAGE mode ]
If you press the OK button after selecting CONTINUOUS,
the screen shown on the side will appear on the LCD
monitor. Press the UP/DOWN button to select the desired
number of continuous shots and press the OK button.
SHOOTING
SINGLE
CONTINUOUS
AEB
NOR
SHOOTING
SINGLE
CONTINUOUS
AEB
NOR
02
You can select continuous shooting or AEB(Auto Exposure
Bracket ) shooting in this menu. If you select
CONTINUOUS or AEB, the flash will automatically be set
to Flash Off.
SINGLE : A picture will be taken each time you
press the Shutter button.
CONTINUOUS : As many pictures as the number of shots
you have set will be taken when the
Shutter button is pressed once. Use this
to take pictures of moving objects/people.
AEB : 3 pictures will be taken continuously, 1 overexposure (+0.5EV), 1 normal
exposure (0.0EV), and 1 underexposure (-0.5EV) respectively. Use this
when it is difficult to determine the exposure level of the subject.